- Step 1
Take all pieces out of the box, grab the joining bar, one leg and assemble it by inserting the pins in the holes. Bolts must face back. See picture for reference.
- Step 2:
Grab the second leg and assemble it on the other side of the joining bar, after that adjust the pre-installed bolts with a screwdriver. To adjust it must make a half turn of the pre-installed bolts in the joining bar as indicated by the arrow stamped on each one.
- Step 3:
Place the top structure (including the drawer) over the legs making sure the magnets match to keep it in place.
- Step 4:
Grab the external power supply included in the box and connect one side to a wall outlet, and the other to the table. The plug is located in the rear bottom of it.