Curvilux smart nightstand is the ultimate product you’ll ever need in your bedroom. It integrates modern design and the latest technology to improve your rest and help you handle your devices in a more convenient way. You can enjoy sunrise like alarms, tuned to your sleeping cycles, charge up to 3 devices simultaneously, keep your belongings safe under a password protected drawer, light your room with powerful and colorful LED lights, and more.
- (1) Pre-assemble smart nightstand
- (2) Legs
- (1) Joining bar
- (1) 110-220V / 12V external power supply
- (1) Drawer lock bolt
- (2) Wall mounting supports
- (2) Screws
- (2) Billets
Take all pieces out of the box, grab the joining bar, one leg and assemble it according to if it fits on the left or right side.
Grab the second leg and assemble it on the other side of the joining bar, after that adjust the pre-installed bolts with a screwdriver. To adjust it, you must make a half turn of the pre-installed bolts in the joining bar as indicated by the arrow stamped on each one.
Place the top structure (including the drawer) over the legs making sure the magnets match to keep it in place.
Grab the external power supply included in the box and connect one side to the house grid, and the other to the table. The plug is located in the rear bottom of it.
Measure the distance between the centers of the holes carved int the back of the table and transfer that measurement to the wall, marking the center of the holes with a marker.
Drill the holes in the wall with the proper device depending on the composition of the wall, then insert the billet and screw the supports, one for each hole.
Place the table, without its legs, matching the holes in the plastic with the supports in the wall. Make some little pressure down to make sure it is in position.
Grab the external power supply included in the box and connect one side to the house grid and the other to the table. The plug is located in the rear bottom of it.
Once the table is connected to the power source, the upper light will flash 3 times indicating that it is starting. Once the lights are turned off the Curvilux table is ready to be used
- Connecting the Bluetooth
You can connect your cell phone to the table via Bluetooth through the Bluetooth settings screen of your mobile device or through the Curvilux app.
If you connect using the Bluetooth setting screen of your mobile device, it will only allow you to play music while the second way of connecting (through the app) you to modify the setting of the table adn manage the alarms, lights, sounds, and lock.
- Wireless and USB chargers
You can charge up to three devices at a time. In the central area of the table, you can charge one device using Qi wireless charging protocol (You can only charge QI compatible devices) You can also charge two devices through the USB connectors.
To turn on the lights, you can do it from the app for mobile phones, as long as you are connected via Bluetooth to the Curvilux table, or through the buttons located next to the USB ports.
1 Click: Turns On & OFF bottom light
2 Clicks: Turns On & OFF top light
You can open the drawer from the app for mobile phones, as long as you are connected via Bluetooth to the Curvilux table, or through the buttons located next to the USB ports. For this, you have to hold only one of the buttons for 2 seconds.
- Spillage of liquids on the table can lead to product malfunction including permanent damage.
- Make sure that the power cord does not strap at any time, also prevents unnecessary movement that may damage the internal connection and therefore the operation of the table.
- In case your drawer is locked, and you do not remember your password do not force it, go to the Curvilux mobile app and recover your password from the help section or contact our team in the support section of the website.
- Do not open the product at any time, since it contains electrical and electronic components that may damage your physical integrity.